|
Post by Pincho Paxton on Sept 1, 2020 14:58:23 GMT
So I got the Behringer FCB1010 foot controller which was originally to control my Boss 505 Loopstation. That worked fine, but I then bought an Aeros Loop Studio which is foot controlled anyway so now I could reuse my Behringer FCB1010 for something else. I wanted to control my Yamaha Genos with it, and setting that up was over complicated.
So many things to go wrong with Midi controllers!
1/ The cable marked In/Out was working backwards as Out/In. 2/ The Genos had commands numbered differently to the controller, you have to add 8 to the commands. 3/ The Genos was set to Bank 16, and I wanted Bank 1. 4/ The Behringer FCB1010 has a strange pedal operating structure.
Once it works, it works, but most of it doesn't work logically... I hate that.
Pincho Paxton
|
|